Jump to content

cannabolic

New Members
  • Content count

    9
  • Joined

  • Last visited

Community Reputation

1 Neutral

About cannabolic

  • Rank
    Newbie

Profile Information

  • Gender
    Not Telling
  1. looking for door lock setwith keys and ignition barrel with key to a Datsun Bluebird 910.
  2. cannabolic

    help with cam identification

    ok, firstly thanks for all replies! - cam moves freely - measured the cam: 1.165 (29.591 mm) & 1.488 (37.759 mm). Would that make .485 lift (12.31 mm)? - it has "B" & 72 deg stamped on back. 272? - rocker arms have various markings; "s12", "s16", "s80", "s-95","s84","75:" and 2x"5:.", What does that mean? Will measure cc as soon as possible. Only head is shaved and it was bought like this. I have a stock, untouched l18 in my stock 910 good read on olddatsuns!
  3. cannabolic

    help with cam identification

    hi, hope someone can help me identify the cam on my u67 head. Is this a stock l20 cam? https://goo.gl/photos/gTgdiX3YZsLipCMG7 https://goo.gl/photos/gtjRqm3tUwrQBLPK7 I assume I'll also need to shim my cam towers if head shaved app .063 ( 1,6mm) ? found that u67 should be 4.25 (107,95mm) untouched. measured mine and its 4.187 (106.35 mm). thanks
  4. cannabolic

    Dust cap Bluebird 910 Help

    I am thinking to ditch the cap and drive without..
  5. cannabolic

    Dust cap Bluebird 910 Help

    I think the kit contains a washer and the locking nut. Thank you for taking the time and looking into this. much appreciated,
  6. cannabolic

    Dust cap Bluebird 910 Help

    Anyone
  7. cannabolic

    Dust cap Bluebird 910 Help

    Hi" Does anyone know what part number this should be/is https://lh3.googleusercontent.com/6Ocqso1e9PpseCkEj1rqsl1xrxNkqLsVB9ZPd9N85mA=w1024-h548-no its a dust cap for the bearing. Its for a EU 1982 bluebird with IRS. The AUS live axle dust caps do not fit. Thanks
  8. cannabolic

    Camshaft bearing bracket question

    That's what I was hoping to hear Thanks guys.
  9. cannabolic

    Camshaft bearing bracket question

    Hi i'm Philip and new to the forum. I just cleaned a newly purchased head and found out that the one of the camshaft bearing bracket bolt got loose. http://img.tapatalk.com/d/13/08/06/nebydany.jpg[/img] Its a u67 and the question is...am i screwed? :-\ Do i need to replace?
×

Important Information

By using this site, you agree to our Terms of Use.