djpapo

breezenahan can you please help me out i need to know the exact size you used for the front and rear coilovers please thank you

@]2eDeYe thank you

Hello i'm looking to buy the hall front suspension bushings for a 1973 620 can anyone point me in the right direction pls thanks

ok guys i did it thanks wayno im not gonna lie after 40 minutes of adjusting turning the truck on and off and checking and double checking driving the truck around the block and for a few blocks adjusting again n again n im not gonna lie i cursed out the guys that came up with the design datsun makers n there moms n my truck a few times lol :rofl: hahahaha i finally got it to where im somewhat happy with it only problem now is that while my foot is off the pedal i can here a somewhat of a noise sounds like the throwout bearing and when i put my foot on the pedal it stops making the noise :c

datzenmike it didn't come with the collar shown on the box it so i used the one that came with the transmission wayno i will do just that when it stops raining

i haven't changed anything yet because its still raining in san francisco out of all days it never rains out here n for the last 3 days it hasn't stopped raining hahahaha lucky me :rofl:

[[/url]

before i put the slave cylinder on again

my old slave sylinder my new bearing not sure if u can see the cutch on this one bearing[/url] the clutch

ok wayne im here I've been writing this but im at work so please help me what exactly do i need to do i had to get ride to work today n catch the bus tomorrow morning because i didn't get to work on my truck today is raining in san francisco no garage no work done on my truck lol

omg this would be the 3rd time i would bring it down this sucks all because lack of knowledge but thanks to you guys i have a better understanding on what i did wrong and how to fix it i mean damn it its a lot of work but i will have my baby on the road asap :crying: :crying: :crying: i will let you guys what happen the minute i get enough time to work on my truck

wow meaning 1st i need the right collar 2nd bring down the transmission 3rd change the wrong collar for the right one n put everything back together ? :confused: :yawn: :rofl: :rofl: :poop: :poop: :poop: :poop: :poop: :poop:

banzai510 my boy told me i could shorten the rod so it could work better i just go the one that goes on the 1983 280zx it looks like the rod is [/url

i tried putting the spring in there to see if it would help but all it did was make the clutch pedal a little harder to push but the slave cylinder looks like is all pushed out and thats with 1st gear in no one pushing the clutch n the truck off

[/url

datzenmike thank you for th quick respond and the answer to ur question is no i didn't use the collar from the 4 speed unfortunately my truck was at my moms garage for about 10 years withe the 4 speed seating around on the floor till it finally made its way to the dumpster with collar and bearing so i used the collar that came with the zx n the original bearing that came with my clutch kit :confused: :confused: :confused:

oh my god im having the same problem i have a 1973 620 i replaced my 4 speed with a transmission from a 1983 280zx i put in a 73 original clutch kid but kept the old slave cylinder on i didn't adjust anything or had to bleed the cylinder it was running good for about 4 days and then it started i couldn't shift to first gear or any gear at all unless i turn my truck off shift to 1st and start the truck with my foot pushing the clutch in then it got worse now i had to turn the truck off shift to 1st gear but when i would turn my truck on the truck would just take off running even thou

what size tires did u use i have the same rims with no tires i dont want the do keep hearing every bang every time y go over any bump or pot holes I'm sick of it lol

http://www.minitruckinweb.com/constructionzone/1301mt_construction_zone_1973_ford_courier/photo_01.html https://www.flickr.com/photos/30233756@N04/4625492430/ http://www.minitruckinweb.com/features/1404_behind_the_scenes_of_featured_trucks/photo_03.html i hope this helps u out

http://www.ford-trucks.com/forums/915020-1953-f-600-4-door-dually-opinion-2.html che this out u might get ideas from this one

:thumbup: :thumbup: :thumbup: :thumbup: :thumbup: yessss just 2 days ago I'm loving the idea i don't have the $$$$ tools place time or knowledge hahahaha i mean i just have ideas so I'm glad someone can do it lol :rofl: :rofl: :rofl: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup:

when i looked it up i didn't find it for a 620 it was for a 521 pick up but is ok the more info the better :geek: :thumbup: :rofl: :sneaky: :thumbup: lol

OK SO IVE SEEN THIS LIGHTS ON A VIDEO AND ANOTHER POSTING AND I WANTED THEM BAD SO AFTER LOOKING THEM UP I DIDNT REALLY SEE NOTHING POSTED FOR A 620 SO I HOPE I CAN HELP THE NEXT PERSON UNLESS SOMEONE ALREDY DID A POSTING AND I DIDNT SEE IT LOL <a href="http://s1294.photobucket.com/user/djpapo40/media/20140724_230536_zps947e7287.jpg.html" target="_blank"><img src="http://i1294.photobucket.com/albums/b608/djpapo40/20140724_230536_zps947e7287.jpg" border="0" alt=" photo 20140724_230536_zps947e7287.jpg"/></a> <a href="http://s1294.photobucket.com/user/djpapo40/media/201

thank you joecool n la combe620 I'm trying my best with what little i have $$$ :) new look to my 620 <a href="http://s1294.photobucket.com/user/djpapo40/media/984117_10203204706614342_3737439353259309479_n-1_zps0b056b12.jpg.html" target="_blank"><img src="http://i1294.photobucket.com/albums/b608/djpapo40/984117_10203204706614342_3737439353259309479_n-1_zps0b056b12.jpg" border="0" alt=" photo 984117_10203204706614342_3737439353259309479_n-1_zps0b056b12.jpg"/></a> <a href="http://s1294.photobucket.com/user/djpapo40/media/10339674_10203204682693744_4569264475034427564_n_zps