Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 10/30/2019 in Adverts

  1. 2 points

    Time Left: 4 days and 10 hours

    • FOR SALE
    • USED

    In with random parts when I bought truck. Make offer

    $20.00

  2. 2 points

    Time Left: 8 days and 8 hours

    • FOR SALE
    • USED

    I am selling my precious baby girl. I will be happy to send information, videos, pictures or videos. Recipes for most of the parts and work done. Located in the Erie PA, Southwest New York, right not the state line and Lake Erie. Pricing the truck at “10K”($10,000 US DOLLARS)

    $10,000.00

    - US

  3. 2 points

    Time Left: 13 days and 23 hours

    • FOR SALE
    • USED

    Automatic transmission parts pulled from a 75 Datsun 620. Included are shifter, crossmember, transmission, torque converter, flex plate, coolant lines, OEM radiator with ATF cooler, brake pedal for automatic transmission, and auto transmission specific wiring harness and flywheel. Ratsun price for everything is trade for a 30 pack of Coors in cans.

    NO VALUE SPECIFIED

    - US

  4. 1 point

    Time Left: 20 days and 6 hours

    • FOR SALE
    • USED

    For Sale - Make an offer 3n71B trans w/ torque converter and flex plate(Off of 1974 710) Automatic trans shifting linkage(Off of 1974 710) L20b block - one cylinder seized due to improper storage, turned over for 1/2 a revolution before seizing, might be slavageable - Free if picked up locally L20b accesories (Keeping head and cam) - Timing cover w/ water pump - Oil pump w/ drive gear - Flywheel - Oil pan/pickup modified for either 1200 or roadster - can't remember Original air cleaner for hitachi carb Hitachi carb - needs a rebuild Valve cover - Shown in picture, 1600 style Misc smog or EGR bits A/C Condensor and bracket(Probably dealership option) - I may or may not take out the rest of the system, tempt me Not Pictured - 710 trunk trim 710 trunk lid w/ rot on bottom edge 710 struts w/ all brake components. No spring perches I haven't taken inventory in awhile and there is probably more than pictured. Willing to ship the smaller items

    NO VALUE SPECIFIED

    Plymouth, New Hampshire - US

  5. 1 point

    This advert is COMPLETED!

    • FOR SALE
    • NEW

    new redline manifold for dual webers. Fits 4 cyl L series engines. the holes for the linkage rod ends are drilled out. i was going to use some larger rod ends i had laying around, then i went single carb and cable linkage. $220 shipped US ONLY 20201009_151945 by R S, on Flickr 20201009_151950 by R S, on Flickr 20201009_152000 by R S, on Flickr

    $220.00

  6. 1 point

    This advert is COMPLETED!

    • FOR SALE
    • USED

    Sliding window from 79 760 king cab. Needs new gasket. Shipping charges are unknown but will only add actual shipping and packing charges.

    $100.00

    Kingsport , Tennessee - US

  7. 1 point

    Time Left: 12 days and 6 hours

    • WANTED
    • USED

    I am looking for 521 L series motor mounts that bolt to the side of the motor. ** Not the rubber ones **

    NO VALUE SPECIFIED

    , California - US

  8. 1 point

    Time Left: 12 days and 6 hours

    • FOR SALE
    • USED

    I have parts from doing a resomod on my 521 that Im sure someone may need. L16 AND 4spd, 389 diff aluminium, air cleaners l16, l20, voltage reg working condition l16, torsion bars complete drive shaft halves, front shocks almost new, original door inner panels (weak cond), l16 radiator, 2 tailgates, truck bed, Chinese tail lights new, wiper switch restored original. z24 short block, L20 crank needs machined, upper inner pivot arms (2). I'm sure there are other items as well, just cant think right now. Make me an offer, glad to help Ratsun folks.

    NO VALUE SPECIFIED

    colo sprgs, Colorado - US

  9. 1 point

    Time Left: 3 days and 11 hours

    • FOR SALE
    • USED

    OEM factory 720 Steering Wheel Fat rubber insulated grip 3 spoke aluminum Wheel vs. cold thin orig plastic steering wheel. Includes rare blue mounting collar (easy to paint black) Fits all 720 and 620 trucks, maybe other Datsun models too. Great condition (No horn button) Can ship within USA Ssking $ 135

    $135.00

  10. 1 point

    Time Left: 7 days and 15 hours

    • FOR SALE
    • USED

    I have for sale complete A14 Datsun engine and 60 A 5 speed transmission non dogleg. The engine was running when I disassembled it. Both items are in excellent shape. Engine and tranny were swapped into my 77 Triumph and I am looking to restore the spitfire it to its original luster. The complete setup includes gearbox and driveshaft. No trades or swaps. Contact me if you are interested. $1350 obo. I am in Las Vegas and if you want to pay for shipping that's fine. I haven't priced it out yet. I will not ship this out of the country, only to continental states. Images are below. Copy link and paste in browser window. Kevin $1350 obo

    $1,350.00

    las vegas - US

  11. 1 point

    Time Left: 6 days and 9 hours

    • FOR SALE
    • USED

    1980 Datsun 510 Z20 exhaust manifold, Send zip code for shipping quote, Pay pal % will be included in total. Have more pic's but there to large. Can a mod fix this problem ? LMK 🙂

    $30.00

  12. 1 point

    Time Left: 2 days and 20 hours

    • WANTED
    • USED

    You could of seen a grown man cry, help me out and make me smile again. I broke mine after moving it to a safer place. Ouch is putting it mildly, and a guy has to try to find a replacement bowl. I'll start collecting shot glasses soon, the next trip to the goodwill will not be the same. thanks for any leads you have,be safe Grant.

    NO VALUE SPECIFIED

  13. 1 point

    Time Left: 6 days and 13 hours

    • WANTED
    • USED

    I found what I was looking for. Thanks I'm looking for the drivers side Motor Mount Bracket, I have the rubber motor mount but I need the Bracket that attaches to the Engine. I also need the bracket that attaches the AC compressor. FYI my truck is an 84 King Cab, 4X4 with a Z24 Engine, CA Emissions. Please let me know if you have these. Thanks Jerod

    NO VALUE SPECIFIED

    Rancho Palso Verdes, California - US

  14. 1 point

    Time Left: 5 days and 6 hours

    • WANTED
    • USED

    Anyone have a good 520 rebuildable carb, I have a carb but missing the accelerator pump lever and retainer, anyone know where get a kit for these?

    $1.00

  15. 1 point

    THIS ADVERT HAS EXPIRED!

    • FOR SALE
    • USED

    Datsun 521 - 520 glove box " black " knob handle OEM. Once installed, it works just like it suppose to. You pull on the knob, the glove box opens, push the door closed, it stays closed. comes complete - it's a plug and play item. all parts are factory original, even the screws. View pic's for condition. price includes item price, pay pal fee's, shipping and once it's shipped, a tracking link so you don't worry if part has been shipped.

    $19.71

    - US

  16. 1 point

    Time Left: 3 days and 10 hours

    • FOR SALE
    • USED

    Datsun 521 - 520 glove box white knob handle OEM. Once installed, it works just like it suppose to. You pull on the knob, the glove box opens, push the door closed, it stays closed. comes complete - it's a plug and play item. all parts are factory original, even the screws. View pic's for condition. price includes item price, pay pal fee's, shipping and once it's shipped, a tracking link so you don't worry if part has been shipped.

    $19.71

    - US

  17. 1 point

    Time Left: 1 day and 22 hours

    • WANTED
    • USED

    Slightly used is ok

    $0.01

    - US

  18. 1 point

    Time Left: 12 days and 12 hours

    • FOR SALE
    • NEW

    interior pillar vents,perfect fit,multiple colors. $15.00 a piece. identical to originals. email or text. Kevin 4253129596.

    $15.00

    Camano island

  19. 1 point

    Time Left: 9 days and 8 hours

    • FOR SALE
    • USED

    Datsun 520 dash instrument cluster. View pic's for condition. Some of the dash light bulbs /holders are missing as seen, if it sells, the missing ones will be replaced. ( Not sure if bulbs/holders will be correct for the cluster but will try my best. ) Shipping is NOT included in the price. Pay pal fee IS included in the price.

    $25.00

    - US

  20. 1 point

    Time Left: 2 days and 14 hours

    • FOR SALE
    • USED

    RADIO and PISTONS SOLD RADIO and PISTONS SOLD RADIO and PISTONS SOLD RADIO and PISTONS SOLD !!!!!! Want to apologize for not responding to the old messages, I've moved and have been very busy with the new house, parts are at the old place, 4 miles away. I make a trip there 2 to 3 times a week. First I want to say is if your active on Ratsun, please lets keep the ball a rolling, time is a factor. If your not very active on Ratsun, you'll need to step it up during the business trans actions. If theirs a delay on your part, I'll have to go to the next person interested on that part, if there is one. I'll be posting up a bunch of pic's from time to time, just tell me what your interested in. Make sure you send a zip code. I won't ask if you didn't. Trying to keep the ball rolling. If you have any questions, please ask NOW. Parts/items sold as is. No returns or refunds. Work days are Monday to Friday PM, check messages every AM & PM M-F, Weekends is family time. Also PLEASE put in subject line ( send message through contact advertiser only ) the part and zip code, makes it easier for me. Thanks for looking. 68 510 wagon not for sale. most items will be shipped USPS -- > https://www.usps.com/welcome.htm?gclid=Cj0KCQjwv73VBRCdARIsAOnG8u1mS4Dpg_WkW8_550XsDx8bFKaJfugOziTkPDi2lQasVsdt3RctnLgaAkeUEALw_wcB just make a guesstimate on the dimensions, weight. you will have a ball park figure. RADIO and PISTONS SOLD RADIO and PISTONS SOLD

    $1.00

  21. 1 point

    Time Left: 9 days and 21 hours

    • FOR SALE
    • USED

    1973 Datsun 620L20b swapU67 head5 speed transWeber carbHeadersElectronic distFront disc brakesMoonroofNew coilNew spark plugsNew spark plug wire setFresh oil change.Nice truck all around. Good to go!!$$$$ only!! Serious buyers.OBO OBO OBO OBO OBO OBO OBOAsking for $6000 but I'm taking all cash offers.

    $6,000.00

    Whittier, California - US

  22. 1 point

    Time Left: 9 days and 10 hours

    • WANTED
    • USED

    Hello! Wondering if anyone has a r1 carb set up they don’t want anymore, I’d like to explore that project and all I’m looking for is the carb setup, hoping to build my own manifold for it. Let me know if you have a set! Willing to rebuild or work with older parts. Thanks!

    $1.00

    San Luis Obispo, California - US

  23. 1 point

    Time Left: 5 days and 3 minutes

    • WANTED
    • USED

    My car is leaking water bad through the rear window. I have a new aftermarket gasket I want to install. Since I have it out I'd like to get a window with rear defrost so I can wire that in. So annoying in the winter time. I know someone has one in their rafters they would like to sell to me Thanks guys!

    $60.00

  24. 1 point

    Time Left: 13 days and 14 hours

    • FOR SALE
    • USED

    No cracks, unwarped manifold with all three collector flange studs intact. $100 + shipping cost email or text pictures of air filter housing are not related to this ad (site issues--pics wouldn't delete)

    $100.00

    San Diego, California - US

  25. 1 point

    THIS ADVERT HAS EXPIRED!

    • FOR SALE
    • NEW

    What I have is this full length Datsun 510 wagon roof rack. This roof rack is custom made and sits low to the roofline. The rack is made up of half inch round tubing and 1/2 inch square tubing. It's completely welded, one solid frame for strength and rigidity. It's been primered and painted with Rust-Oleum Silver Hammer finish. The wood slats are stained with a natural color and is coated with polyurethane clear to help protect against the outdoor elements. The wood is screwed down with stainless steel fasteners. The rack comes with 4 mounting clamps and stainless steel Hardware. Easy to install and gives Your Wagon a whole different look. If you're interested or have any questions please feel free to ask. Shipping is available via Greyhound Freight. Pickups are welcome. Thanks for looking

    $325.00

    Whittier - US

  26. 1 point

    Time Left: 3 days and 19 hours

    • FOR SALE
    • USED

    Located 1 hour north of Bakersfield, CA.4 old Datsun pickups for sale. Even though I've owned many early 1960's Datsun trucks (8) I am not an expert so anything you read from here on is to the best of what has been told to me over the years. If you find a mistake please “kindly” let me know and I stress kindly. I'm 65 years old and will never get to restore these “beauties”.1st truck is a 1960 Datsun PLG221. The 221's have the very hard to find “short sided” bed. This bed was only used on the PLG 220 and 221. According to some Datsun literature only 45 PLG221's were sold in the United States.The cab is almost identical to the later 222's/223's except for a few differences, one of them being the 221 does not have the indention just rear of the side windows. For that reason you can't put a short sided bed on a 222 or 223 and call it a 221. I mean you can do that as they fit but someone with a sharp eye will see the difference.The 221 is the white one in the pictures. It has a 1976 Datsun B210 engine, 5 speed transmission and rear end pumpkin in it. It will cruise at freeway speeds if you have the guts! It is mostly rust free with the exception of the rocker under the drivers door which is an easy fix. The truck is really straight and solid. The bed has 1 bondo star even though I cannot find any damage on the inside of the bed. These are single wall beds so I have no idea why there is any bondo there. It has Toyota wheels on it I think, they look good but not original. It even has the little original bumperette's.The 221 needs work and deserves it. The last time I drove the truck it ran great but had a brake hanging up a bit. I can't begin to list every single item that needs attention so just remember it's a 59 year old truck that hasn't been restored but is SUPER cool. This truck is titled in my name and on non-op. The glass is all good if I remember correctly.How many PLG221's have you seen for sale or seen at all? I've watched for years and the only one I've ever seen other than mine is the two that sold through “Bring a Trailer”. The first time it sold for around $7,600 and the last time it was somewhere around $13,000. It is a nice truck and looks completely stock from Bakersfield, CA. There was also a white one on BAT and it sold for almost $8,000 in 20162nd truck is a 1960 Datsun PLG222. Yes it's a 1960 even though it's a PLG222 compared to the previous truck being a 1960 PLG221. Again according to some Datsun literature only 253 PLG222's were sold in the United States.This truck is completely stock but rusty. I got it with the idea of maybe putting the 221 back completely stock. This truck is rusty BUT not so bad it couldn't be saved and really straight. That is the reason I never parted it out. It has windshield pillar rust, rocker rust and bed rust but it would be a shame to lose this truck. I do not have a title for this truck but all the ID and VIN tags are intact in good shape. The glass is all good if I remember correctly.3rd truck is a 1961 Datsun PLG222. Yes it's a 1961 even though it's a 222 compared to the previous truck being a 1960 PLG222. We call this the “Patina” truck. This is a super solid truck. I haven't had the truck running but the previous owner (a friend) said it ran good and the brakes worked great. The gas tank needed boiled out so he ran a line from a gas can and drove it around his property. He boiled the tank but never reinstalled it. I put the tank in and started with new points, cap, plugs but never finished. The last time I checked the brakes were still up. It's a very straight rust free truck and completely stock. I have the title from 1965. The glass is all good if I remember correctly.4th truck is a 1963. It has been started with a Mustang II front end. All of the Mustang II is installed but it needs the steering finished. They shaved the chrome, emblems and hooks on the bed. I do have the chrome and emblems. The truck is really straight and a good start on a modern conversion. The glass is all good if I remember correctly. No engine or transmission. I have a pink slip for this truck.Look at the pictures and ask questions. There aren't many trucks out there in this year range so I'm starting the prices where I think is fair although I'm sure I'll get the “are you crazy” responses. Show me some ad's with comparable trucks and I might reconsider. Like I said I've followed these trucks for several decades but always willing to listen to reason. I'm not hurting for space or money so I will not entertain a “take it off your hands” price. With that in mind I would like to see them go to good homes that will appreciate them and hopefully restore them.Asking prices,1960 PLG221----------$8,5001960 PLG222----------$2,5001961 PLG222----------$4,5001963 L320--------------$1,250With that in mind if you want to get silly like I did I will consider a package price for all 4, or just the 3 PLG's.I will also consider a package price for the 1960 221 and 1960 222 if you want to make a completely stock 221 with a ton of spare parts.Been a horse trader all my life so always intrigued with a swap but won't consider anything where I feel liked I'm getting the wrong end of the horse! Later model Duramax, etc will always get my attention. I know but a guy can dream!Seriously, some cool trucks needing good homes.Email preferred but call if it's best for you. I will not answer generic looking emails. Put just the word "Datsun" and I will answer for sure. I turn my phone off after 6:00 pm so don't expect any return calls until the next day. More pictures and phone number, copy and paste glennsmisc.com

    NO VALUE SPECIFIED

    Porterville, California - US

  27. 1 point

    Time Left: 13 days and 22 hours

    • FOR SALE
    • USED

    Untitled by raymond medeiros, on Flickr Untitled by raymond medeiros, on Flickr Untitled by raymond medeiros, on Flickr I am selling the Nardi wheel, Nardi shift knob and Nardi to MOMO adapter. I got way more then that in it. Price is firm plus shipping. I do take PayPal, first I'll take it gets it. If you know me then you know I have real nice stuff. Thank you Ray

    $350.00

    Eastvale, California - US

  28. 1 point

    Time Left: 4 days and 19 hours

    • WANTED
    • USED

    Looking for a j13 oil pan for my 1967 411 wagon.

    NO VALUE SPECIFIED

  29. 1 point

    THIS ADVERT HAS EXPIRED!

    • FOR SALE
    • USED

    condition: good Brown center console from Nissan / Datsun 720 4x4 pickup truck. This is from the “short” transmission version. Functional battery and oil pressure gauges. Couple of small extra holes on each side and some light scratches from age. Located in Los Angeles. Will ship at buyers expense.

    $75.00

    Los Angeles, California - US

  30. 1 point

    Time Left: 12 days and 21 hours

    • FOR SALE
    • USED

    Pair of 44's pictured on a KA 12 valve engine with intake. Will also work on a Z24 block. New Linkage & isolators. $1500 including the intake, head & long block, more or less.

    $1,500.00

    Concord NorCal, California - US

  31. 1 point

    THIS ADVERT HAS EXPIRED!

    • FOR SALE
    • USED

    SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD removed from a 68 520 parted out a few years ago. Before removing the radiator the engine was ran for several hours and showed no signs of leaking. The tanks are solid, inlet and outlet have no signs of leakage, the mounting brackets are also solid. Want $45.00 for the radiator, shipping / paypal fee's not included. OR you can purchase it for $97.00 with pay pal fee's included. Your choice. Cleaning up the storage building so last time up for sale. This sale is for active members ONLY !!! Must be in contact every day ( takes average of 2 days ) if you want to do business. Tire kickers do not need to bother. TY

    $45.00

    , Idaho

  32. 1 point

    Time Left: 7 days and 17 hours

    • FOR SALE
    • NEW

    $1500 obo...If your intrested Send me a DM, the bed is included It was just took an off for the notch to airbagg the truck. Truck is in decent shape with basically no rust. I was gonna do a ground up build but lost interest. Truck is on Non-Ok and ready for a new owner?.

    $1,500.00

    La Mesa, Ca

  33. 1 point

    Time Left: 2 hours and 7 minutes

    • FOR SALE
    • USED

    Made in Japan super lite wheels fit over Willwoods with tires 215 and 205 x 60 tires ,So Cal will call please direct e-mail hosestop@msn.com

    $450.00

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.