Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 10/05/2021 in all areas

  1. Pretty sure he was at a salon getting a mani pedi
    4 points
  2. Hey, I'm from another age. Hell I've traveled in a steam locomotive train when I was 3 and saw them in use till I was 5. Manscaping is like shaving your manliness off and shaving your body? well that's just decadent.
    3 points
  3. Spend 5 min on you-tube and that's all there are is ads for groin shaving metro sexuals. I mean WinTF?
    3 points
  4. Or he stopped drilling permits, halted fracking and shut down Keystone. Yeah, Covid
    3 points
  5. I hope so. I don't really like seeing long, loose pubes in the urinal or bowl
    3 points
  6. Is this the gateway to the manscaping trend or further evolution? Do shaved armpits help lower your temperature when sick? So many questions.
    3 points
  7. Sorry but that is bullshit, it has proven we can have stadiums full of people at football matches and government sponsored dinners and events and they dont get it at all if the appropriate social status, sorry, distance is maintained. Covid even knows the difference between a blm protest, which is OK and a lockdown protest, not ok, possible super spreader event. Matthew has undoubtedly attended a non sanctioned event or area, possibly a small ma and pa Cafe (they are the worst) or maybe even visited family🤯 and is not telling the truth due to the shame of it. Stick to big chain stores and government sponsored events and you will be safe..... you know it's almost like covid and the government's of the world are working together🤔
    3 points
  8. Heat shield. $5 aluminum tray for my R-1 carburetors.
    2 points
  9. 2 points
  10. Once the intake was cleaned up, it was time to make a heat shield. This isn't anything fancy, but I made a cardboard template and then transferred it to aluminum. It mounted nicely to the manifold and then added some insulation to the underside as well. I made a small bracket for to attach it to the underside of the carbs as well (there are 2 studs under the carb for this purpose). Progress made and I will have more updates shortly!
    2 points
  11. Even at my age I can fit my foot in my mouth very easily.
    2 points
  12. Prevents chafing, insulates and traps pheromones. Using depilatory products is NOT evolving any more than tattoos are.
    2 points
  13. My first datsun wasn't the king cab and it had two settings. North Pole and the 9th ring of hell.
    2 points
  14. Do they stick to your legs?
    2 points
  15. At 47 years I shaved my balls the first time(electric razor). Ever seen a sheared sheep in the summer? Gained a full 3 seconds in the quarter mile! Hairy hair figs you can have em.
    2 points
  16. This fracking was shitting the bed before Biden. Simply don't believe politicians especially presidents. https://www.technologyreview.com/2021/07/01/1027822/fracking-boom-jobs-industry/ Dav you are pretty spot on with the reality and not the shit the previous and now current president shout out. We are in for a ride of higher costs for everything. Even if you took cars out of the equation you have oil in a about everything you own. Plastic, Clothing, your home, paint ect. is all synthesized from oil. Even 90% of the electricity ( depending where you live) is from oil or natural gas. So all these electric cars are running on hydrocarbons with the additional loss of heat to mechanical loss to electrical loss to charging loss back to mechanical is a mess. Nothing green about an electrical car. Oh
    2 points
  17. So you are saying arse beards are no longer in? interesting....... It appears that various threads on Ratsun are giving conflicting opinions and information in regards to the current trends of pubic hair maintenance. I've only seen this sort of misinformation spread about when it comes to the virtues of dual vs single dcoe's. 🤯
    2 points
  18. The game is probably where you caught it,or from your son ? I never believed the 6' distancing thing myself.Airborne means just that.I doubt that shit flies out of somebody's mouth or nose and just falls before the 6' mark.What if it's breezy ? That shit could fly a hundred feet.
    2 points
  19. Yes ! And the truck is not too shabby either.
    2 points
  20. You could gargle with hydrogen peroxide (>3%) too.
    2 points
  21. doctor gave me the pill form.
    2 points
  22. 1957 Chevy Bel Air wagon spotted yesterday...
    2 points
  23. '83 has always stumped me too. Engine change, dash gauge change some other things I can't remember, all around 11 '82. I had an old 283 that went 250 miles on a quart and the plugs were black, crusty wet with oil and that's twice the cylinders and half your amount. This don't look right. That powder deposit on the outer electrode is bad intake valve guide seals. The oil being sucked in is atomized and mixed with gas and air and will combust much cleaner than oil coming up past the oil control rings. That oil is in contact with the cooler cylinder walls and is like dripping oil on a hot frying pan. It smokes badly. If the engine puffs a blue cloud only on start up this is another indication of bad seals. You can change the valve seals easily and with few tools without taking the head off by removing both rocker arm shafts carefully, with the rocker arms on. Loosen all the bolts slightly in stages till fully loose. This will close all the valves and get the rockers out of the way. Push a couple of feet of yellow nylon rope in the spark plug hole (tie a large knot on the end to keep it from falling in) Turn crank shaft pulley bolt by hand with a wrench to compress the rope against the closed valves. Now you can compress the springs and remove the keepers with no fear of dropping a valve down inside. Pry the old seal up and off and tap the new ones down and on. Turn the crank backwards to release the rope, and on to the next cylinder. When done install the rocker shafts and tighten in stages, not each bolt all at once. This can be done even on the side of the road. I've never used compressed air. I find that kind of scary. You need a fitting, hose, compressor and a reliable electricity source and once started you can't really stop in the middle.
    1 point
  24. 17 years in the making. Such an inspirational build. Check out Jose's project 450HP SR20 swapped 4 door Datsun 510 in Northern California! I did an interview video with him, check it out and enjoy!
    1 point
  25. Who are you and how did you get into Mike’s account to make this post?
    1 point
  26. Good. Now I'll stop talking about voltage.
    1 point
  27. Moving some of my fresh fruit boxes ,, I think I should have bought a little bigger truck
    1 point
  28. How much metal fab experiance and tools do you have available? The ka swap is doable but requires time, skills, money, and experiance or a combination of the above that makes up for what's missing. Sounds like your Z24 may not be doing very good! If you have low range you should be able to use all the gears no matter the hill steepness on your fire roads. Do you have a Weber? Could be worth just getting a healthy Z24 in there. As far as "building" a Z24 there isn't a lot to be done, some minor head work, a cam is available and a good carb is about the limit without going crazy
    1 point
  29. All the fan speeds work and heat comes out of them in each setting. When I put my hand close to the vent it is hot as hell. I know I have to clean the system out manually cause some debris comes out of it sometimes and one of the vents is clogged. Tomorrow night I'll close all the windows and turn the heat on to see how hot it gets.
    1 point
  30. No that couldn't be it.LOL.
    1 point
  31. Just curious if you believe Newsom's raising of the gas tax (along with Jerry Browns) caused folks here in Cali to use less gasoline ? I kind of liked Trump's "short term effects" low gas prices,about four years if remember correctly.
    1 point
  32. Groin shaving sounds dangerous.I'll stick to just trimming around the trunk a little bit.
    1 point
  33. I need to pull my Sansui Speakers out of storage and set them up in the garage! They sound really nice.
    1 point
  34. Uggh, that strut tower is exactly why I got out of Caddy’s. I’ve half cut so many that the fun went out of it.
    1 point
  35. I guess I have a test to try.... Either way everything seems more stable and running better... I'll make sure to do a proper 2nd to 3rd gear full rpm pull getting on the highway.. true test if things are working right..... Edit, I couldn't wait to find out the answer to the voltage comment.... I started the truck and checked the readings, same as yesterday... Disconnected the alternator and still the exact same readings.....
    1 point
  36. They are pulling the engine through a revolution or two before starting, to clear the cylinders of oil.
    1 point
  37. So if the US is the largest producer why the high price? I bet they sell it on the world market for huge profits rather than selling it at home. I bet they get wet every time the price goes up
    1 point
  38. Watch that Hyperpyrexia close bud..luke warm showers and cool moist towels and popsickles..105 is considered a medical emergency (heat stroke). also get some of these https://www.walgreens.com/store/c/halls-defense-vitamin-c-assorted-citrus/ID=prod6011678-product The reason I suggest these is when your body has enough C it dumps the rest into your elimination but as a drop your saliva will deliver it to the affected area and ascorbic acid converts to H2O2 (hydrogen peroxide), wont hurt you but will kill virus load in your throat. https://coremedscience.com/blogs/wellness/science-of-vitamin-c-benefits-beyond-the-common-cold
    1 point
  39. True, but still that's a lot of oil.
    1 point
  40. Biden wants us to shave our armpits ? we have to stop this guy.
    1 point
  41. 3 Bluebirds for 3,000,000 Yen https://page.auctions.yahoo.co.jp/jp/auction/l1007420637 Bluebird 510 with documents and without documents 3 units sold together 3 units will be sold together Part 1. Bluebird H510 6-point roll cage with documents Many other parts are currently out of order, immovable Part 2. Bluebird H510 with documents, rust rot Therefore, you need a unic car to pick it up. Part 3. Bluebird N510 No documents, 1400 engine rusted, long ago after purchase, hung a sheet and left in the field. It looks like there are no shortages. There may be. Thank you for the above three units . (Added at 10:20 on September 26, 2021) I 'm sorry for the late image. I tried to polish the silver car stored under the roof a little. The paint is still good and glossy. If you really want to buy it, please be sure to check the current car. I don't think there are any reckless people who bid without confirmation, but thank you for your cooperation. 1971 1600 or 1800SSS 1972 1600GL 1971 1600SSS racecar Would be so fun to check them out and see what all the parts are that come with the cars!
    1 point
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.