Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 08/09/2020 in all areas

  1. I would never pay $20K for a 521 and I doubt anyone else would either. Anyone know what the highest a 521 has sold for in all these years?
    2 points
  2. Reagan against Mondale. I remember that one. America could use some Ronnie right now.
    2 points
  3. 2 points
  4. Mr. Stoffregen , i like the way you think . i did just that with my windshield sprayers and i can do it again with the line organizers . i don't know why i didn't think of it first ! thanks , Butter Fingers
    2 points
  5. I don't care too much about him running his mouth and tweeting, I think he'd be better off not doing so but ... I do care about his results and they have been Great! from placing the embassy in Jerusalem to full employment so much so that a 1 legged ass kicker could get a paying job, renegotiating NAFTA and trade deals elsewhere and standing up to the new Axis powers of North Korea, China, and Iran. So since we are analyzing leaders Mike tell us how you feel about Mr Justin Trudeau ? Do I hear whispers about Aga Khan? or lack of ethics with the Justice dept? and I hear he takes lesso
    2 points
  6. Trump is the best we're going to get at this time.I see no problem with it.It's exactly the shakeup we needed.I live in California where my vote doesn't even matter.Thank God most of this country could see through the bullshit.And yes Mike,we know you don't like him but go ahead and tell us again anyway.We know he's orange,can't talk and is a womanizer.Also a child molester because he knew Epstein.
    2 points
  7. 9 trillion increase under Obama.It went down ?
    2 points
  8. I'm really looking forward to the debates.I think Trump should just stay quiet and let Biden do his campaigning for him by being a bumbling fool.This is why Biden is not out and about touring the country.The Covid thing is an excuse.
    2 points
  9. That was a good write up! I used it to change out the leaking filler neck on my car and worked out great. I used Spectra Premium FN724 for the filler neck. Had to make some cuts on it so that screws could pass through and bolt up. Before cutting it: After cutting it: Modified the original piece by removing the locking mechanism for the lid: Not sure why I added this gasket, don't think it was needed: Fully Assembled: Later on I added a viton flag so that any drips of gas don
    2 points
  10. Just got my wife this 1966 Datsun 520 as a Christmas present for us to work on together and for her to use as her farm stand truck. It's in amazing condition for a 53 year old vehicle but I'm sure I will become a regular here begging for advice so thanks in advance to the community!
    1 point
  11. Real good advise, it's advantageous be methodical and deliberate one step at at time Those sites were very helpful and enlightening, thanks Considering exchange and shipping rates need to be included, I may have a meagre margin to work with but when the supply is insufficient, alternative action is imperative
    1 point
  12. I saw on one BAT with typical mods, lowered, etc. for $8900. https://bringatrailer.com/listing/1971-datsun-521-pickup-4/ Makes me think I could get at least that on BAT if I were to sell mine.
    1 point
  13. I believe it's actually "welded" in at four points. I ground down the plastic in those spots and it came out clean.
    1 point
  14. Part # 13270- U2000 (L16) should be the same L16,L18,L20. I looked up for L16. Suggested list $32.17 NNA show 13 left available in the country. So, yes OEM is still available. See your local dealer, Or, PM me.
    1 point
  15. I wonder if that was taken near the airport?
    1 point
  16. 1 point
  17. In your opinion maybe, but time and time again the left has shown and proved beyond all measure a unbeatable and irrefutable superior level of whiny cuntness....😁
    1 point
  18. Well it has been a long time. I should come up with a tag line of "I will serve no dime before it's time." It's a fancy way of saying I can't get shit done.. I don't think you did. It is a little offset also but then I keep hearing goon's are like that. But, this is a different rear end so ..... I am just going to keep doing stuff that is in front of me and I have parts for
    1 point
  19. You forgot Silver Streak. I'm not biased... the rights are whiny cunts too.
    1 point
  20. Read what you said Mike..... The left makes it a big fucking deal. Those rules don't apply for whites, we don't give a shit about "white face" I assume you are white, so naturally you wouldn't give a shit. Remember the movie "White Chicks" starring the Wayans brothers? That was fairly recent. I didn't watch it and didn't give a shit. Now, on the other hand, a modern movie like 1985's Soul Man starring C. Thomas Howell (in black face) would definitely not fly today..lol The whiny cunts? again, the bleeding heart left.
    1 point
  21. Got a new wheel / tyre setup. Saving for some paint!
    1 point
  22. BTW, the only time democrats care about the "deficit" is when a republican is in power, did you actually believe Obama when he sold Obamacare as the greatest thing since sliced bread and that it was going to reduce drug prices? You really bought the bullshit? Did you actually believe that you wouldn't lose your current insurance and keep your doctor? You should go back and read the bill that Nancy Pelosi didn't but went ahead and signed it.
    1 point
  23. Try harder. Yet for all that, people do judge you by the company you keep. You may not share their values but appearances are everything. Yes celebrity photos are meaningless unless to prove you were with someone at some time. I don't have a picture of me and the pope or Epstein
    1 point
  24. What’s a seductive cross dressing painting between friends?
    1 point
  25. Never forget that this was found in Epstein's place
    1 point
  26. Mike I would definitly hope that I would never be judged by 2 people that I hung out with in High school and had plenty of pictures of all of us at parties and social functions. Jim Elsted killed Aaron Iturra. I was friends with both of these people. I just so happened to visit both on the same day this happened. Does that make me like the company I keep? https://the-line-up.com/gang-mom-mary-thompson Jason Brumwell: This is another person that was within my social group. I have pictures of all of us in the group standing in locker bay C in Willamette HS i
    1 point
  27. Little memory refreshment for dhp who clearly is still suffering from Trump derangement syndrome.... I'm still mind boggled people believe the MSM... All you need to do is see/watch/hear all the information raw and if you're somewhat intelligent realize it was all a power play to stop Trump from fulfilling his duties as POTUS.
    1 point
  28. Facts don't matter, it's what your feewings say that matter, damnit you should know this!
    1 point
  29. Awesome to see so many people here from Mass. I live out in western ma, springfield to be exact. I just picked up a 73' 620, Just gotta wait to finish my 00 S10 that I am currently doing the bodywork to and finishing up the air bag suspension. I so wish i was closer to more people into the min truck scene. my wife has a 99 S10 that is bagged that we picked up from Lakeville MA about 2 months ago. Great work so far on this. Where did you guys get the SR from? This is the motor and trans I want to put in my 620.
    1 point
  30. Also led headlights as well as a full rear ended rebuild with poly urethane in the rear. Car feels so different and looks so different after 25 years of being the same.
    1 point
  31. If you insist on absolute certainty, you will be paralyzed. [J Paul Getty] Go with your gut sometimes.
    1 point
  32. Everyone here says based on facts. Not saying your's isn't just everyone else does.
    1 point
  33. And the reason I didn't include Trump is because it looks like he wasn't involved, I'll give you the short version and the sources because I base my statements on FACTS. 1. Giuffre outright states Trump never did anything with here (as opposed to those who did) and she never witnessed him do anything with anyone else. The court documents do NOT implicate him at all but do implicate Clinton and Andrews. In fact the reporter for this actually made shit up about Trump which Giuffre adamantly denies. Giuffre testimony: "In a partial transcript of a confidential video deposition un
    1 point
  34. I you want to get rid of the pressure switch you can put a switch from a 720 or anything else and mount it where most switches are mounted in 80s vehicles where the pedal arm actives the switch, this is what I did in my 1966 Datsun 520, but I am using a 1980 Datsun 720 wiring harness, you would just need to make a couple wires that go from the pressure switch to the new switch inside the cab.
    1 point
  35. Few weeks ago sun bathing before she went to the exhaust shop. image1 3 by v p, on Flickr
    1 point
  36. Welcome to Ratsun, congrats on your 520 find. I own a 66 520 and have done lots mods and work on it. It has been a ten year project that I need to finish. I drive a 1986 720 king cab and it takes a lot of maintenance to keep these old trucks on the road. As far as your 68 520 my suggestion to you is to buy double of any wear items that you find as the parts for these little trucks are drying up. Many of the parts I have purchased for mine over the years have come in as not the correct parts. Get the window rubbers and have them on hand for when you do the paint.
    1 point
  37. Hey all, Wanted to update this and tell you i found out why it wasn't getting spark, it was the points that were bad. I was just so fixated on thinking my wiring was wrong i didn't look so far downstream on the electrical system. Thanks for all the help for that, i changed the points and started right up first try. I changed the carb and need to get that tuned up right and check the timing again to get the truck running smoother. I made a smaller sub harness for the taillights and ran new wiring to the back for it, got water proof connectors and wired those up. getting closer to w
    1 point
  38. where the orginal wires go? find the ON wire find the 12 volt start wire. ON wire . goes into the IN side ballast and comes out ballast to the + side coil Start wire. goes to the +side coil. or the out side of the ballast and then jumpered to the + side coil/ To find START wire remove the starter wire so you don't engage starter. this is for your set up with a point coil(higher ohm) and ballast
    1 point
  39. I got to some things this weekend. I changed the shifter bushing (it was completely missing one) and it feels %1000 better. I replaced some vaccum hoses that were cracked thanks to datzenmike's catch on a previous post. Took the truck out of a little drive and it runs a lot smoother, In fact the idle now is a little higher from no more vaccum leaks. I finally got most of my electrical upgrades hoarded so i started to pull the engine and interior harness. I uncovered some more hacks and added things to my list to replace in the future. Pics..
    1 point
  40. did some work on the doors the other day, Turns out the driver side door didn't open from the inside but locked from the outside, and the passenger side was the opposite. I saw that the nylon for the door rod was broken for the driver side, got that fixed and just an e clip was missing from the back of the lock on the passenger side. is there a picture or part someone can link to of what holds the door rod in the middle of the door? both of mine are broken.
    1 point
  41. I would still machine the tip of the insert so that it sits below the surface of the forging. If you were careful, you could knock it down on a belt sander.
    1 point
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.