Datsun Parts For Sale Latest Topics

WTB: 90-95 31 spline HG43 axle 4.375 lsd from Pathfinder

Fri, 12 Nov 2010 22:27:12 +0000

Anybody have a Pathfinder rear end (H233 axle 31 spline) laying around from a 90-95 Pathy with the 4.375 gearset in limited slip? Checked Spaldings, nothing left in the yard. Found a 4.62 gear ratio, but that's a little too low without much bigger tires. All I need is the center section, not the whole axle. Want more traction for the hardbody. PM if you have one. Looking for under $100. I'm in Spokane.

-Matt

710/810??? parts emblem/marker light/ clocks

Mon, 04 Jun 2012 01:27:34 +0000

I have some small parts I believe from 710 maybe 810 dont remember its been a while

brand new rear marker with housing $10

grill emblem $5

clocks $25 each ??

CAN/AM Production easy wiring boxes for EFI works for KA's SR's VG's CA's and more

Sun, 23 Jan 2011 06:29:46 +0000

CAN/AM Power Products box's

The CAN/AM boxes that Rob and I designed and built make wiring newer EFI Nissan engines into our old Datto's, or any cars for that matter, much simpler. These boxes take the place of the point to point wiring that would normally be done by us "do it yourselfers." Making the wiring easier for the new to wiring guys by following the drawings, which are also under construction. Using this box cuts HOURS out of the EFI wiring as well, I've wired countless Nissan engines and from now on I'm going to use these boxes. SO SO much faster and cleaner. Use this link to see how it works with each engine.

By hooking up a constant power to the box from the battery then connecting the 15 or less screw terminals your done! Then when it comes time to trouble shoot there are 6 leds, 3 that let you know if the fuses are bad and then 3 that turn on with the relays.

There are a few fully assembled. We made a limited run, hopefully they will sell so we can keep making them. Soon I will have all the wiring charts in the how to section to work with every motor. 150 bucks and well worth it, I will ship it for free if you live in the lower 48.

510/280zx bump steer spacers(roll center adapters)

Fri, 11 May 2012 15:33:01 +0000

I have 10 sets of bump steer spacers(roll center adapters) for sale. These are cnc machined from 6160 billet aluminum. Cost will be $65.00 per set plus shipping. They do not come with the longer bolts but can be supplied for an additional $10.00. These are not anodized but plain aluminum. Shipping will be approx $12.00 depending on where you live. They are coming out of Vancouver B.C. and I can ship anywhere. Any Questions feel free to e-mail me.

Thanks

I have 10 sets of bump stop spacers(roll center adapters) for sale. These are cnc machined from 6160 billet aluminum. Cost will be $65.00 per set plus shipping. They do not come with the longer bolts but can be supplied for an additional $10.00. These are not anodized but plain aluminum. Shipping will be approx $12.00 depending on where you live. They are coming out of Vancouver B.C. and I can ship anywhere. Any Questions feel free to e-mail me.

Thanks

Some Datsun 510 parts, l20b, (header is sold!!!) and some other stuff

Wed, 22 Feb 2012 06:40:17 +0000

I have some spare stuff laying around that i know longer need if my prices seem unreasonable let me know, i dont have much idea what a lot of this stuff is worth

Located in stanwood wa, prefer pickup or meet up but will ship (exception of the motor and header)

Datsun 1600 OHC valve cover, was in the process of polishing, needs to be finished. 30$
Long Tube header, ran on both an l16 and l20 in my 510 100$
2 barrel carb intake manifold 20$
Radiator shroud 10$

L20b, just came out of my 71 510, ran when pulled a few weeks ago, leaky valve guides (hve new ones), front cover gaskets leaked a little, has a ported head on it, pretty quick motor. Good compression
Flywheel
oil pump
fan
fan pulley
waterpump
new headgasket in it
crank pulley
alternator
Good clutch and pressure plate

Almost complete, no distributer it stayed in my car, willing to part the motor out or take it away for 125$

you can pm or Email spudly13@msn.com
id also be in interested in a part trade (cash on my end) for a set of wheels, either 13 14 15 or 16 by 7 or 8

Need any upholstery work

Wed, 20 Feb 2013 01:36:30 +0000

3 Seats with new foam starting $400

3 seats no foam starting $300
1 piece carpet installed or shipped $150 shipping might be extra
Trunk carpet $50 OR FREE WHEN BUY HOLE CARPET
Front and rear panels $150
Any ? Hit me up

$ is based off 510

s110 h190 with disc brakes

Thu, 09 May 2013 01:41:45 +0000

in good working condition, drained a little of the oil before buying, it looked pristine.

im in austin, texas. ill ship if youre willing to pay for it, but...

300$ obo

l20b with 4 speed, and or 5 speed

Thu, 09 May 2013 05:42:46 +0000

I got a l20b w53 head i pulled out of my 78 620. When pulled about a month ago it was missing bad, but would sort itself out for a lil while if i reved it. comes with a 4 speed that shifts smooth. i also have a 5 speed that works really well, but 5th doesnt stay in gear.. Has a very new clutch (less than 200 miles). For the engine and 4 speed i want to try to get 200$, just so i can recoup some of my losses when i did my KA swap. and i want 50obo for the 5 speed. It's probably really minor stuff thats wrong with both, but im too lazy and unmotivated to mess with em. can email/text pics.

240z rear brake drums

Thu, 09 May 2013 04:52:12 +0000

Two rear aluminum rear brake drums off a 1972 240z. Good condition no cracks

$90.00 obo

6 lug JDM star spoke 2 piece rims. Kelowna CAN. PRE-SALE

Tue, 07 May 2013 15:52:22 +0000

http://classifieds.castanet.net/details/6_x_5.5_two_piece_japanese_tuck_rims_-_5_rims/1622076/

Pictures are there.

I am currently in Newfoundland CAN till the end of the month. This is a PRE-SALE. Unless you want to drive to Kelowna, BC to get them.

6 lug 5.5 spacing, 15Rx10W -39Off.

$800 for 5 rims

F/S: Grant Steering Wheel - 13" Formula GT

Wed, 08 May 2013 19:00:41 +0000

I have a 13" Grant Formula GT steering wheel for sale. It is in perfect condition, no rips or tears. Comes with all of the hardware, horn button, etc. All you need is a Grant hub.

http://www.grantproducts.com/products/view/73/

$80 OBO

parts. L20b/620 (price drop)

Fri, 19 Apr 2013 20:14:44 +0000

Hey what's up everyone. I have some things for sale. Sorry no shipping.

Stock Hitachi carb off a '79 $40 obo

Remanufactured L20b dizzy only used 3 months $90 obo

Stock coil $10 obo

620 gauge cluster and ignition delete $5 obo

620 center console missing both deletes and shift boot small crack on top $20 obo SOLD

620 fenders $50 obo

71 521 turn signal/high beam switch washer bag

Thu, 09 May 2013 01:14:53 +0000

I have some misc 521 parts for sale.

69 gas cap SOLD

71 turn signal/ high beam switch $60 plus shipping

washer bag with bracket $30 plus shipping

chrome door pulls SOLD

chrome door levers $5 each plus shipping

1300 emblems ( 1 good 1 has broken tabs ) SOLD

Stock 240z wheels Aluminum mags

Mon, 06 May 2013 21:06:04 +0000

pictures are here

http://losangeles.craigslist.org/lac/pts/3786860520.html

200 cash takes all the wheels with tires.

I am in the los angeles area.

EDIT: Price drop to 200.

NE - fs - j13 motor and transmission

Thu, 18 Apr 2013 03:21:53 +0000

parting out motor and transmission..

starter - $50 paypal'd and shipped

distributor - $50 paypal'd and shipped

engine mounts - $50 paypal'd and shipped

transmission mount - $50 paypal'd and shipped

alternator - $50 paypal'd and shipped

exhaust mani - $50 paypal'd and shipped

have engine and dash wiring complete - $50 pp/shipped

call or text 402-637-3260

i have a 1.3l j motor for sale out of my 67 datsun 520. motor ran amazying and does not leak. the transmission leaks but it does work. no grinds. i have the wiring harness and cluster that will also come with it.

Matchbox Dizzy, 510 and 620 parts, Coil Over mounts UPDATED

Tue, 07 May 2013 15:14:28 +0000

Trying to sell some parts to fund my build. Prices include shipping unless otherwise noted.

620 coilover brackets for a king pin truck (accidentally purchased the wrong ones and I am trying to get some of my money back from having to purchase 2 sets). As you can see from the pictures, one side was tacked on and cut back off. This is purely cosmetic and wont effect the function.

$125

Electronic matchbox dizzy off an L motor

$90

Pre '78 turn signal switch $40

Chrome door mirrors $35/pair or $20/ea ***(SOLD)***

"Datsun" or "1600" 4 cylinder L-Series valve cover $30/ea ***(1600 cover SOLD)***

Unknown year 510 gauge cluster $45

Matching 510 gauge bezel $25

--Take the pair for $60

(first 510 purchase comes with the 510 trunk badge)

I think my prices are fair but I am open to offers and can do package pricing for anyone interested.

PM me here or text for faster response 5O9-37O-O552

Carroll Shelby minilite Mag Wheels 14x6.5 4x114.3 $400

Wed, 01 May 2013 19:34:41 +0000

Hello, I'm selling a set of Carroll Shelby minilite mag wheels that came off my 1973 Datsun 240z.
They are in really good condition. Very age appropriate for older cars.
Tires are 90%. Lots of tread left on them.
Fronts:
14x6.5 4x114.3 185/70/14
Rears:
14x6.5 4x114.3 195/70/14

Offset is roughly 0 through +10. The offset is the same for all rims.

Asking 400+shipping for the set. I'm located in Portland, OR

See listing for pictures: http://portland.craigslist.org/mlt/pts/3748475547.html

Manual Pedal set and Stainless brake line kit

Sun, 05 May 2013 15:57:50 +0000

sold

280z dashboard with guages for sale

Wed, 08 May 2013 20:57:57 +0000

i have a nice 280z dash i will like to sell for $250 ,dash includes all guages and harness,,,,,dash has no cracks but a lil split on the side ,,,,,please text my #732 804 0993 and i will send u pics ,,,,,,,i post pics once i figure how to post pic on here

__ Nissan Skyline GT-R R34 Hot Wheels Diecast AutoDrive® 8GB USB Flash Drive - FREE Shipping

Thu, 21 Mar 2013 22:19:58 +0000

Need an excuse to carry a toy car in your pocket?

Brand new 8GB AutoDrive® USB Flash Drive Hot Wheels 1:64 diecast Nissan Skyline GT-R (R34). Wheels roll. This item is hand-built from a new in package Nissan Skyline Hot Wheels diecast car from the HW Showroom series, #158/250.

Flash drive capacity of 8GB will hold approx 7000 3 Megapixel pictures, or 1000+ MP3's at at a time, or whatever other files you may want to carry around with you. Just pop the AutoDrive® into your computer's USB port, sync up the files you want, and pop it back into your pocket. Plug it into your USB equipped car stereo to hear your favorite music.

$16, includes FREE domestic shipping

I'm a FAST shipper, and will PM you with shipping details as soon as the item goes out.

Please PM if interested

S30 Classic style carbon fiber rear deck spoiler

Sun, 05 May 2013 02:15:39 +0000

'Classic' style carbon fiber Z car (240Z 260Z 280Z) rear deck spoiler from MSA (TheZstore.com), never mounted.

Has a few blems but still a beautiful accessory for your Z !

Blems are some spots that look like they need to be buffed out and some scratches on top and a small piece of resin that broke off towards the bottom left. I can provide better pics via email by request.

Never mounted but price is reflective of condition (basically careless shop treatment :blush: ), but a steal for someone that can work out the finish on a CF piece or run it as is...still look badass !

MSA now listing these at $334. http://www.thezstore.com/page/TZS/PROD/50-1576

I have this on Craiglist at $220 but Ratsun price is >> $199 <<.... Ben needs some quick cash !

s13 sr20det and s14 sr20de

Wed, 08 May 2013 02:54:33 +0000

Im selling both my sr20's because im never going to use them. My cars have the motors I want so its time to let these go. Im not sure what they are worth but I am open to both parting them out, selling one, or selling as a package deal. I am located in BOISE IDAHO. If you cant pick up from BOISE IDAHO then im sorry but the deal most likely wont work out. Please text 619-733-3691. I think 200 per motor is fair so Ill start my asking price at 400 for everything sr related I have.

First up is a Blacktop S13 Sr20det disassembled. It is long block only but taken apart due to piston failure. Block has no damage that i can find. No accessories included.

S13 blacktop:

Block disassembled

Pistons/Rods (pistons need replaced, rods look good so does crank and bearings. Looks to me like someone had a detonation issue)

Head is assembled

Flywheel and used clutch is there as well

Waterpump

Valvecover

Second is an S14 Sr20de. This motor is mostly assembled but is missing accessories. The owner before me tried to pull the oil pump off (to sell because apparently S14 oil pumps are worth more than S13). He was apparently in a rush because he damaged the head gasket between the oil pump and head. I removed the head to replace the head gasket but HAVE NOT put it back together. This motor has intake manifold and exhaust manifold.

S14 Sr20de:

Block assembled

Head assembled

Intake manifold semi complete (no throttle body)

Exhaust manifold

Valvecover

Alternator

Flywheel and used clutch included

Also if someone is feeling real power needy i have a sr20det longblock fully built. Dyno'd 740WHP. The motor is built oil pan to valvecover. I want 2,200 for it.

Non - Smog exhaust manifold, L-series, 4 cyl.

Wed, 01 May 2013 21:03:42 +0000

This is a 4 cylinder L series exhaust manifold.

This is in good USED condition but needs two studs replaced ( you can see them in the second photo )

$60.00 plus shipping

1972 Clean White 620 For Sale $5,000 OBO...

Wed, 08 May 2013 16:14:22 +0000

Well the the BRE 510 sold and now it is round II... I have my white '72 620 up for sale and I'm taking names... As I don't have much faith in the neighbor who wants to buy it at the end of the month and he failed to meet his deadline at the end of last month...

I've had the truck 5 years as a DD. It has modern rotary type air conditioning system which can freeze you out of the cab. Everything is fuctional on the truck. I have added the Titan wheels, upgraded the front drum brakes to HardBody disc brakes. It's got an L18 with a A87 peanut head and a 5 speed 200sx trany. All the front suspension components are tight and in great shape. New exhaust. BMW projectors with HID lights. All exterior filiment bulb have been replaced with LEDs. Euro front and rear turn signal bodies and lenses. Interior is very clean with good condition original interior carpeting. Bench seat in perfect condition. Dash is in descent shape. Momo steering wheel. Body exterior is clean and straight with no rust... Please contact me if interest as it will be available by the end of this month. Located in Whittier, CA.

74 620 ignition clam shell

Thu, 04 Apr 2013 23:02:02 +0000

35 shipped.

Clean, no cracks, mounts for screws are good, comes with working hazard switch also.

Pm me for picture